HomeBlog and guidesMobility
Blog and guides
Mobility✓ Verified on 30 August 20264 min readUpdated on 30 August 2026

Ulys toll badge: ready on arrival, installation and troubleshooting

An Ulys toll badge does not need to wait for a delayed activation after delivery. According to Ulys's official terms and help pages, it is active as soon as it is removed from its protective pouch. The two points that matter are fitting it correctly and knowing the safe procedure if a lane does not detect it.

Ulys toll badge: ready on arrival, installation and troubleshooting

What works immediately, and what may take time

Ulys badge timings and actions
SituationConfirmed timingWhat to do
Badge receivedNo general activation delayRemove it from the protective pouch and fit it
Passage through an equipped laneUsable once fittedApproach at the stated speed and follow the signs
A79 Flux Libre+ optionUp to 48 hours for this optionDo not confuse this with badge activation
Badge not detectedAct immediatelyHazard lights, intercom, no reversing

The 48-hour period sometimes repeated online relates to the Flux Libre+ option on the A79. It does not describe how a delivered, correctly fitted badge normally works.

Source: Ulys guidance for free-flow toll motorways.

Fit the badge in the correct position

Ulys recommends attaching the holder to the right or left of the interior rear-view mirror, then sliding the badge into the holder. This position reduces the risk of the windscreen or another part of the vehicle interfering with the signal.

If your vehicle has a heat-reflective windscreen, find the shaded area intended to let radio signals pass. It is usually close to the mirror. Check the vehicle handbook if the correct area is unclear.

Before the first journey, confirm that the holder is firmly attached, the badge is out of its protective pouch and nothing covers it. Do not leave it loose on the dashboard.

Source: Ulys guidance on positioning the badge.

If the barrier does not open

A failed detection is not a reason to reverse or get out of the vehicle. Ulys instructs drivers to switch on their hazard lights, use the lane intercom and follow the operator's instructions. This protects both the occupants and approaching traffic.

If the badge works in some lanes but not others, check its position first. If it no longer works anywhere, contact Ulys support from a safe place. Do not try to diagnose the device while stopped at a closed barrier.

Source: Ulys guidance for a badge that does not work.

Pre-departure check

Is your badge ready?

Question 1 of 2

Is the badge out of its pouch and fitted near the rear-view mirror?
Do you know what to do if it is not detected?

In brief

An Ulys badge is usable as soon as it leaves its protective pouch. Fit it near the rear-view mirror, in the dedicated area if the windscreen is heat-reflective. If it is not detected, remain in the vehicle, switch on the hazard lights and call through the intercom.

Information checked on 30 August 2026 against Ulys's official help pages and terms. Check the current instructions before travelling.

The manually verified Ulys referral code, official link and current terms:

View the Ulys referral offer →

Related guides

PlanParrainPromo.fr is not an official partner of any brand mentioned. Amounts and conditions change, so always check the current offer on the brand's official website before signing up.